Spill control focuses on preventing, containing and cleaning up leaks involving oils, process fluids and hazardous liquids. Product selection must consider chemical compatibility, temperature, surface condition, exposure time and the site response procedure.
Cast polyurethane can be engineered in different hardnesses and geometries for temporary containment, drain protection, floor bunding and emergency spill-response equipment.
Advantages for Spill Control Applications
- Amplia resistencia química
Polyurethane formulations offer different resistance to oils, fuels, water, acids, alkalis and solvents. Compatibility must be checked against the exact liquid, concentration, temperature and contact time before use.
- Rendimiento de sellado flexible
Low- to high-durometer polyurethane can be molded for flexible contact or structural containment. Soft, tacky formulations can conform to clean concrete, metal or plastic surfaces without a permanent adhesive, subject to surface condition and product design.
- Durabilidad y reutilización
Many polyurethane spill-control products are non-absorbent and reusable. Cleaning and decontamination must follow the liquid’s safety data sheet and site procedures; inspect the product for swelling, cuts or loss of tack before reuse.
- Resistencia al agua y a la intemperie
Suitable polyurethane grades can be used in humid, wet or outdoor locations. UV exposure, standing water, temperature and surface contamination should be included in the material and product selection.
Aplicaciones clave
- Barrera flexible de poliuretano para contención de derrames / Barreras / Diques
Flexible polyurethane berms (often around 60 mm × 100 mm × 3 m, with custom sizes available) can follow curves and angles to create temporary containment zones. The formulation, weight and floor contact are selected for the liquid, surface and required containment period.
- Protectores de drenaje y cubiertas de sellado de uretano
Low-hardness, tacky urethane can create a temporary liquid-tight seal over a clean floor drain when the cover is correctly sized and the surface is suitable. Custom-size reusable covers are used in plants, warehouses, workshops and laboratories.
- Borde para suelos de PU / Borde resistente de PU
PU floor bunding is a cast polyurethane containment barrier for permanent installation. Low-profile designs (often 50-100 mm high) can be fixed to suitable floors; vehicle-rated configurations require the correct profile, adhesive or anchors and load assessment.
- Sellos de seguridad de uretano
Urethane safety seals are used in spill kits and emergency-response equipment across industrial and institutional facilities. Seal geometry and polyurethane formulation should be selected for the liquid, surface and expected contact time.
Productos relacionados para el control de derrames
– Cubierta y junta de drenaje reutilizable de poliuretano
Protector de desagüe de uretano adhesivo para el sellado rápido y reutilizable de desagües de suelo en plantas químicas, almacenes y talleres.
– Bermas triangulares de poliuretano para contención de vertidos
Barrreras flexibles contra derrames que se adaptan al contorno del suelo, creando diques temporales para contener fugas de petróleo y productos químicos.
– Productos para el control de derrames (poliuretano moldeado a medida)
Piezas personalizadas de poliuretano para el control de derrames, incluyendo contenedores para suelos, juntas y otros componentes diseñados para la contención de fugas.
