Spill control focuses on preventing, containing and cleaning up leaks involving oils, process fluids and hazardous liquids. Product selection must consider chemical compatibility, temperature, surface condition, exposure time and the site response procedure.
Cast polyurethane can be engineered in different hardnesses and geometries for temporary containment, drain protection, floor bunding and emergency spill-response equipment.
Advantages for Spill Control Applications
- 広範囲な耐薬品性
Polyurethane formulations offer different resistance to oils, fuels, water, acids, alkalis and solvents. Compatibility must be checked against the exact liquid, concentration, temperature and contact time before use.
- 柔軟なシール性能
Low- to high-durometer polyurethane can be molded for flexible contact or structural containment. Soft, tacky formulations can conform to clean concrete, metal or plastic surfaces without a permanent adhesive, subject to surface condition and product design.
- 耐久性と再利用性
Many polyurethane spill-control products are non-absorbent and reusable. Cleaning and decontamination must follow the liquid’s safety data sheet and site procedures; inspect the product for swelling, cuts or loss of tack before reuse.
- 防水・耐候性
Suitable polyurethane grades can be used in humid, wet or outdoor locations. UV exposure, standing water, temperature and surface contamination should be included in the material and product selection.
主な用途
- ポリウレタン製フレキシブル防油堤／バリア／堤防
Flexible polyurethane berms (often around 60 mm × 100 mm × 3 m, with custom sizes available) can follow curves and angles to create temporary containment zones. The formulation, weight and floor contact are selected for the liquid, surface and required containment period.
- ウレタン製排水口プロテクター＆シールカバー
Low-hardness, tacky urethane can create a temporary liquid-tight seal over a clean floor drain when the cover is correctly sized and the surface is suitable. Custom-size reusable covers are used in plants, warehouses, workshops and laboratories.
- PUフロアバンディング／PUタフバンディング
PU floor bunding is a cast polyurethane containment barrier for permanent installation. Low-profile designs (often 50-100 mm high) can be fixed to suitable floors; vehicle-rated configurations require the correct profile, adhesive or anchors and load assessment.
- ウレタン安全シール
Urethane safety seals are used in spill kits and emergency-response equipment across industrial and institutional facilities. Seal geometry and polyurethane formulation should be selected for the liquid, surface and expected contact time.
関連する流出防止製品
– 再利用可能なポリウレタン製排水口カバー＆シール
化学プラント、倉庫、作業場における床排水口の迅速かつ再利用可能な密封用粘着ウレタン排水口保護材。.
床の形状に沿って設置できる柔軟な防油堤。油や化学薬品の漏出を一時的に封じ込めるための堤防を形成します。.
– 流出防止製品（カスタム成形ポリウレタン）
カスタムポリウレタン製漏洩防止部品（床用防漏枠、シール、その他設計された漏洩封じ込めコンポーネントを含む）。.
